Web design by Karlan Digital Limited 2017
We have range of options when it comes to weather stations. From a basic system for monitoring wind speed right up to a comprehensive set of sensors covering wind, temperature, barometric pressure, humidity, rainfall, solar radiation etc. More details are given below but if you require any further information, please contact us
The KCU-6L control unit/data logger is at the heart of the weather station and has an extensive menu system to enable the user to customise as required. Menu options are far too many to describe here but if you have any particular questions, please contact us for more details
This is our multi sensor unit gathering wind speed, direction, temperature, barometric pressure, relative humidity, dew point and rainfall. The system is also connected to our KMS-2 buffer/interface and KLS-2, submersible tide sensor. The data is sent through several telemetry relay stations (thanks to several hills!). For more information, please contact us
Here we have another multi sensor unit gathering wind speeds, direction, temperature, barometric pressure, relative humidity, dew point and rainfall. The system is hardwired to the DPM-2 control unit, situated 100m away. For more information, please contact us
On the left is our ultrasonic anemometer reading wind speed and direction. Wind data is processed and buffered along with data from temperature and barometric pressure sensors using our KMS-2 buffer interface. Here, the KMS-2 is hardwired to the DPM-2 control unit, situated 5m away. For more information, please contact us
Above and to the right are more pictures of our ultrasonic anemometer reading wind speed and direction. Wind data is processed and buffered along with data from temperature and barometric pressure sensors using our KMS-2 buffer interface. The KMS-2 is normally hardwired to the DPM-2 control unit, sometimes situated as far as 2km away. For more information, please contact us
KDL are pleased to announce the launch of two new wind sensor/display systems. Aimed at user installation, these new low cost systems contain an electronic control and display unit along with a choice of ultrasonic or traditional wind sensors, power supply and documentation. The WS-1c is a triple display system showing wind direction and wind speed in digital format, along with a compass style display for wind direction. The WS-1d is a dual digital display system without the compass display. Both of these new products, along with traditional or ultrasonic wind sensors are designed to give reliable and accurate wind information. For more information, please contact KDL Sales
